View NL8060AC26-17_1172562.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2000 data sheet description NL8060AC26-17 is a tft (thin film transistor) active matrix color liquid crystal display (lcd) module comprising amorphous silicon tft attached to each signal electrode, a driving circuit, and a backlight. nl8060bc26-17 has a built-in backlight. the backlight includes long-life-lamps and the lamps are replaceable with a holder. the 26 cm diagonal display area contains 800 600 pixels and can display 262144 color simultaneously. nl8060bc26-17 is suitable for industrial application use, because the viewing angle is wide and the luminance is high. also, the viewing direction is selectable either upper or lower side by changing scan direction. features ? high luminance (280 cd/m 2 , typ.) ? wide viewing angle (with retardation film) ? low reflection ? reversible scan direction ? 6-bit digital rgb signals ? data enable (de) function ? edge type backlight with two long-file-time lamps (one lamp holder) ? lamp holder replaceable ? recommendation inverter: part no. 104pwbr1 applications ? display terminals for control system ? monitors for process controller document no. en0493ej1v0ds00 date published february 2000 p printed in japan the information in this document is subject to change without notice. please confirm with the delivery specification before statting to design the system. tft color lcd module NL8060AC26-17 26 cm (10.4 inches), 800 600 pixels, 262144 colors, high luminance, wide viewing angle
NL8060AC26-17 2 data sheet en0493ej1v0ds00 structure and functions a color tft (thin film transistor) lcd module is comprised of a tft liquid crystal panel structure, lsis for driving the tft array, and a backlight assembly. the tft panel structure is created by sandwiching liquid crystal material in the narrow gap between a tft array glass substrate and a color filter glass substrate. after the driver lsis are connected to the panel, the backlight assembly is attached to the backside of the panel. rgb (red, green, blue) data signals from a source system is modulated into a form suitable for active matrix addressing by the onboard signal processor and sent to the driver lsis which in turn addresses the individual tft cells. acting as an electro-optical switch, each tft cell regulates light transmission from the backlight assembly when activated by the data source. by regulating the amount of light passing through the array of red, green, and blue dots, color images are created with clarity. block diagram 47 w r0 - r5 47 w g0 - g5 47 w b0 - b5 digital signal processor 47 w clk 47 w h sync 47 w v sync lcd timing controller power supply circuit lsis drivers v-driver 600 lines 2400 lines tft lcd panel h: 800 3 (r, g, b) v: 600 level shift ? ? ? ? ? 47 w de 47 w mode dps 47 k w v cc gnd (sg) frame back light v h v l h-driver * frame is not connected with gnd (sg).
NL8060AC26-17 3 data sheet en0493ej1v0ds00 inverter v ddb back light brthl brtc brth brtl gndb (part no: 104pwbr1) outline of characteristics (at room temperature) display area 211.2 (h) 158.4 (v) mm drive system a-si tft active matrix display colors 262,144 colors number of pixels 800 600 pixels pixel arrangement rgb vertical stripe pixel pitch 0.264 (h) 0.264 (v) mm module size 243.0 (h) 185.1 (v) 11.5 max. (d) mm weight 520 (typ.) contrast ratio 300:1 (typ.) viewing angle (more than the contrast ratio of 10:1) horizontal : 50 (typ. left side, right side) vertical : 35 (typ. up side), 45 (typ. down side) designed viewing direction ? wider viewing angle with contrast ratio : down side (6 oclock, normal scan) up side (12 oclock, reverse scan) ? wider viewing angle without image reversal: up side (12 oclock, normal scan) down side (6 oclock, reverse scan) ? optimum grayscale ( g = 2.2) : perpendicular color gamut 43 % (typ. center, to ntsc) response time 15 ms (max.), white 100% to black 10% luminance 280 cd/m 2 (typ.) (lamp current: i l = 5 marms per lamp) signal system 6-bit digital signals for each of rgb primary colors, synchronous signals (hsync, vsync), dot clock (clk) supply voltage 3.3 v [5.0 v] (logic, lcd driving) backlight edge light type, two cold cathode fluorescent lamp in a holder, attached inverter ? lamp holder set: part no.104lhs31 ? recommended invertor: part no. 104pwbr1 power consumption 7.0 w (typ. at 3.3 v, with a recommended inverter)
NL8060AC26-17 4 data sheet en0493ej1v0ds00 general specifications item specification unit module size 243.0 0.5 (h) 185.1 0.5 (v) 11.5 max. (d) mm display area 211.2 (h) 158.4 (v) mm number of pixels 800 (h) 600 (v) pixel dot pitch 0.088 (h) 0.264 (v) mm pixel pitch 0.264 (h) 0.264 (v) mm pixel arrangement rgb (red, green, blue) vertical stripe display colors 262,144 color weight 550 (max.) g absolute maximum ratings parameter symbol rating unit remarks supply voltage v cc C0.3 to 6.5 v v i C v cc < 3.0 t a = 25 ?c input voltage v i C0.3 to 6.5 v lamp voltage v l 2000 v rms t a = 25 ?c storage temp. t st C20 to 60 ?c operating temp. t op 0 to 50 ?c module surface * humidity < = 95 % relative humidity t a < = 40 ?c (no condensation) < = 85 % relative humidity 40 < t a < = 50 ?c absolute humidity shall not t a > 50 ?c exceed t a = 50 ?c, 85 % relative humidity level * measured at the panel surface (including self-heat) electrical characteristics (1) logic, lcd driving t a = 25 ?c parameter symbol min. typ. max. unit remarks supply voltage v cc 3.0 3.3 3.6 v v cc = 3.3 v (4.75) (5.0) (5.25) (v cc = 5.0 v) logic input l voltage v il 0Cv cc 0.3 v cmos level logic input h voltage v ih v cc 0.7 C v cc v supply current i cc C * 360 550 ma v cc = 3.3 v C (270) (500) (v cc = 5.0 v) * checker flag pattern (in eiaj ed-2522)
NL8060AC26-17 5 data sheet en0493ej1v0ds00 (2) backlight t a = 25 ?c parameter symbol min. typ. max. unit remarks lamp current i l 2.0 5.0 5.5 marm with one lamp lamp voltage v l C 510 C vrms C lamp turn on voltage v s 840 C C vrms ta = 25 ?c *2 1265 C C ta = 0 ?c *2 oscillator frequency ft 50 54 58 khz *1 *1: recommended value of "ft". ? ft is within the specification. and ? ft = 1/4th (2n-1) th: hsync period n: a natural number (1, 2, 3) if ft is out of the recommended value, interference between ft frequency and hsync frequency may cause beat on the display. *2: when vs is less than min. value, lamp might be not turned on it. *3: recommended inverter: part no. 104pwbr1 supply voltage sequence 3.0 (4.75 v) 3.0 (4.75 v) time 0s NL8060AC26-17 6 data sheet en0493ej1v0ds00 y t interface and connector pin assignment (1) interface signals, power supply module side connector mating connector cn1 ... df9-41p-1v (no. 1 to 41) df9-41s-1v supplier: hirose electric co,. ltd. pin no. symbol function 1 gnd ground 2 clk dot clock 3 gnd ground 4 hsync horizontal sync. 5 vsync vertical sync. 6 gnd ground 7 gnd ground 8 gnd ground 9 r0 red data (lsb) 10 r1 red data 11 r2 red data 12 gnd ground 13 r3 red data 14 r4 red data 15 r5 red data (msb) 16 gnd ground 17 gnd ground 18 gnd ground 19 g0 green data (lsb) 20 g1 green data 21 g2 green data pin no. symbol function 22 gnd ground 23 g3 green data 24 g4 green data 25 g5 green data (msb) 26 gnd ground 27 gnd ground 28 gnd ground 29 b0 blue data (lsb) 30 b1 blue data 31 b2 blue data 32 gnd ground 33 b3 blue data 34 b4 blue data 35 b5 blue data (msb) 36 gnd ground 37 de data enable signal 38 dps scan direction select note 3 39 v cc power supply note 1 40 v cc power supply note 1 41 mode mode select note 2 lsb : least significant bit msb : most significant bit notes 1. v cc : all v cc terminals should be connected to 3.3 v [5.0 v]. 2. mode: h = fixed mode l or open = de mode 3. dps can change scan direction (normal scan and reverse scan). dps: vcc = normal scan gnd or open = reverse scan see display position about another way for reversible scan.
NL8060AC26-17 7 data sheet en0493ej1v0ds00 (2) lamp connector lamp side connector mating connector cn2 bhr-03vs-1 sm02 (4.0) b-bhs-tb supplier: j.s.t trading company, ltd. pin no. symbol function 1v l low voltage terminal 2v h high voltage terminal 3v h high voltage terminal * v h and v l must be connected correctly. if you make a mistake to connect, you will get hurt and the module will break. (nec) inverter side connector 1 mating connector 1 cn1 lz-5p-sl-smt lz-5s-sc3 supplier: japan aviation electronics industry limited (jae) pin no. symbol function pin no. symbol function 1v ddb power supply (12 v) 4 gndb backlight ground 2v ddb power supply (12 v) 5 brthlluminance select * 3 gndb backlight ground * high luminance (100 %) brthl = high (+5 v) or open low luminance (60 %) brthl = low (gndb level) inverter side connector 2 mating connector 2 cn3 il-z-3pl-smty il-z-3s-s125c3 supplier: japan aviation electronics industry limited (jae) pin no. symbol function 1 brtc backlight on/off signal note 1 2 brth luminance control input note 2 3 brtl luminance control input note 2 notes 1. ttl level backlight on brtc = high (+5 v) or open backlight off brtc = low (gndb level)
NL8060AC26-17 8 data sheet en0493ej1v0ds00 2. <1> a way of luminance control by a variable resistor. this way works when brthl (no.5 pin) of cn3 is opened. mating variable resistor : 10 k w 5 % minimum luminance (50 %) : r = 0 w maximum luminance (100 %) : r = 10 k w <2> a way of luminance control by a voltage this way works when brtl is opened. the range of input voltage between brth and gndb is as follows. minimum luminance (50 %) : 2.5 v maximum luminance (100 %) : < = 1.2 v brtl brth r
NL8060AC26-17 9 data sheet en0493ej1v0ds00 (3) connector location upper side lower side cn2 1 2 3 1 3 41 2 4 40 cn1 cn3 recommended inverter (104pwbr1) 1 2 3 1 2 3 4 5 ? ?
NL8060AC26-17 10 data sheet en0493ej1v0ds00 display colors vs. input data signals display colors data signal (0: low level, 1: high level) r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 black 000000 000000 000000 blue 000000 000000 111111 red 111111 000000 000000 basic colors magenta 111111 000000 111111 green 000000 111111 000000 cyan 000000 111111 111111 yellow 111111 111111 000000 white 111111 111111 111111 black 000000 000000 000000 000001 000000 000000 dark 000010 000000 000000 - ||| red grayscale | | | ||| bright 111101 000000 000000 111110 000000 000000 red 111111 000000 000000 black 000000 000000 000000 000000 000001 000000 dark 000000 000010 000000 - ||| green grayscale | | | ||| bright 000000 111101 000000 000000 111110 000000 green 000000 111111 000000 black 000000 000000 000000 000000 000000 000001 dark 000000 000000 000010 - ||| blue grayscale | | | ||| bright 000000 000000 111101 000000 000000 111110 blue 000000 000000 111111 note colors are developed in combination with 6-bit signals (64 steps in grayscale) of each primary red, green, and blue color. this process can result in up to 262144 (64 64 64) colors.
NL8060AC26-17 11 data sheet en0493ej1v0ds00 input signal timing (1) input signal specifications parameter symbol min. typ. max. unit remarks clk frequency 1/t c 34.0 38.362 40.0 mhz 26.067 ns (typ.) duty tch/t c 0.4 0.5 0.6 C C rise, fall tcrf C C 10 ns C hsync period th 24.3 26.693 C m s 37.468 khz (typ.) C 1024 C clk display period thd 800 clk C front-porch thf C 24 C clk fixed mode 4 24 C clk de mode pulse width thp 2 72 127 clk fixed mode 2 72 C clk de mode back-porch thb 2 128 198 clk fixed mode 2 128 C clk de mode thp + thb 200 clk fixed mode 15 200 C clk de mode clk-hsync timing thch 10 C C ns C hsync-clk timing thcs 8 C C ns C hsync-vsync timing thv 1 C C clk C vsync-hsync timing tvs 15 C C ns C rise, fall thrf C C 10 ns C vsync period tv 16.1 16.683 17.2 ms 59.94 hz (typ.) C 625 C h display period tvd 600 h front-porch tvf C 1 C h fixed mode C 1 C h de mode pulse width tvp 1 2 23 h fixed mode 1 2 C h de mode back-porch tvb 1 22 23 h fixed mode 1 22 C h de mode tvp + tvb 24 h fixed mode 2 24 254 h de mode rise, fall tvrf C C 10 ns C clk-data timing tds 8 C C ns C data-clk timing tdh 12 C C ns C rise, fall tdrf C C 10 ns C de de-clk timing tes 8 C C ns C clk-de timing teh 12 C C ns rise, fall terf C C 10 ns * all of parameters should be kept in the specified range. data r0 - r5 g0 - g5 b0 - b5
NL8060AC26-17 12 data sheet en0493ej1v0ds00 (2) definition of input signal timing tvp tv vsync display period (note) tvb tvf tvd de thp th hsync display period thb thf thd de (note) note these do not exist as signals.
NL8060AC26-17 13 data sheet en0493ej1v0ds00 (3) input signal timing chart t c tch clk hsync ths thv 0.5 v cc 0.7 v cc 0.5 v cc 0.3 v cc tvrf vsync clk thcs thch 0.5 v cc 0.7 v cc 0.5 v cc 0.3 v cc thrf hsync 0.7 v cc 0.5 v cc 0.3 v cc terf de (r0-r5) 0.7 v cc (g0-g5) 0.5 v cc data tdrf tdrf tdh tds invalid (b0-b5) 0.3 v cc terf tes teh tes teh invalid 0.7 v cc 0.5 v cc 0.3 v cc tcrf tcrf
NL8060AC26-17 14 data sheet en0493ej1v0ds00 a) fixed timing mode 12 201 200 (note: y = 0 to 599) 1000 1001 1023 0 clk hsync 2clk (min.) 200clk (fixed) 1clk 800clk (fixed) 24clk invalid invalid d (0, y) d (1, y) d (798, y) d (799, y) hsync invalid r0 - r5 g0 - g5 b0 - b5 24 25 623 624 0 623 624 23 3 2 1 24h (fixed) hsync vsync 1h (min.) 1h 600h (fixed) 1h hsync d (x, 0) d (x, y) d (x, 598) d (x, 599) invalid (note: x = 0 to 799) invalid d (x, y) d (799, y) invalid 1h (min.) r0 - r5 g0 - g5 b0 - b5 r0 - r5 g0 - g5 b0 - b5 2clk (min.) d (0, y) d (1, y) 24 0 b) de mode
NL8060AC26-17 15 data sheet en0493ej1v0ds00 1 02 (note: y = 0 to 599) 1 0 clk hsync thb 1clk 800clk (fixed) thf invalid invalid d (0, y) d (1, y) d (798, y) d (799, y) invalid r0 - r5 g0 - g5 b0 - b5 2 1 0 tvb hsync vsync 1h 600h (fixed) 01 de d (x, 0) d (x, y) d (x, 599) invalid (note: x = 0 to 799) invalid d (0, y) d (1, y) d (x, y) d (799, y) invalid r0 - r5 g0 - g5 b0 - b5 r0 - r5 g0 - g5 b0 - b5 thp de de tvp tvf
NL8060AC26-17 16 data sheet en0493ej1v0ds00 display position normal scan (dps = "vcc") d (0, 1) d (1, 1) - -------- d (x, 1) - - ------- d (798, 1) d (799, 1) d (0, 1) d (1, 1) - -------- d (x, 1) - - ------- d (798, 1) d (799, 1) --------- --------- d (0, y) d (1, y) - -------- d (x, y) - - ------- d (798, y) d (799, y) --------- --------- d (0, 598) d (1, 598) - -------- d (x, 598) - - ------- d (798, 598) d (799, 598) d (0, 599) d (1, 599) - -------- d (x, 599) - - ------- d (798, 599) d (799, 599) reverse scan (dps = "gnd" or "open") d (799,599) d (798,599) - -------- d (x, 599) - - ------- d (1,599) d (0,599) d (799,598) d (798,598) - -------- d (x, 598) - - ------- d (1,598) d (0,598) --------- --------- d (799, y) d (798, y) - -------- d (x, y) - - ------- d (1, y) d (0, y) --------- --------- d (799, 1) d (798, 1) - -------- d (x, 1) - - ------- d (1, 1) d (0, 1) d (799, 0) d (798, 0) - -------- d (x, 0) - - ------- d (1, 0) d (0, 0) * below drawings show relations between the scan direction and the viewing direction. normal scan reverse scan d (0, 0) d (799, 0) d (0, 599) d (799, 599) c n 1 c n 2 d (0, 0) d (799, 0) d (0, 599) d (799, 599) c n 1 c n 2 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
NL8060AC26-17 17 data sheet en0493ej1v0ds00 optical characteristics ta = 25 c note 1 item symbols conditions min. typ. max. unit remarks contrast ratio cr note 2 150 300 C C note 3 luminance lu nax. note 2 200 280 C cd/m 2 note 4 luminance uniformity C max./min. C C 1.4 C note 5 reference data item symbols conditions min. typ. max. unit remarks response time t on white to black 100% ? 10% C 15 50 ms note 6 t off black to white 0% ? 90% C 65 80 ms color gamut c at center, to ntsc C 43 C % C horizontal q x+ cr > 10, q y = 0 45 50 C deg. note 7 q xC cr > 10, q y = 0 45 50 C deg. vertical q y+ cr > 10, q y = 0 30 35 C deg. q yC cr > 10, q y = 0 40 45 C deg. notes 1. v cc = 3.3 v, il = 5.0 ma rms, dps = high at normal scan with recommended inverter. 2. viewing angle: q x = 0 , q y = 0 , at center. 3. the contrast ratio is calculated by using the following formula. luminance with all pixels in "white" luminance with all pixels in "black" the luminance is measured in darkroom. 4. the luminance is measured after 20 minutes from the module works, with all pixels in "white". typical value is measured after luminance saturation. the luminance is measured in darkroom. 1 photodetector (topcon bm-5a) 50 cm lcd module viewing angle range contrast ratio (cr) =
NL8060AC26-17 18 data sheet en0493ej1v0ds00 5. the luminance uniformity is calculated by using following formula. maximum luminance minimum luminance the luminance is measured at near the five points shown below. (160) column line (320) (480) (120) (240) (360) 1 2 3 4 5 6. definition of response time is as follows. photodetector output signal is measured when the luminance changes "white" to "black" or "black" to "white". 0% 10% 100% 90% ton toff white black time display color luminance range 7. definitions of viewing angle are as follows. left right lower perpendicular upper 12 o?lock x+ x q q q y+ q y luminance uniformity =
NL8060AC26-17 19 data sheet en0493ej1v0ds00 reliability test test items test conditions judgement high temperature/humidity 50 2 c, 85% relative humidity note 1 operation 240 hours display data is black. heat cycle (operation) <1> 0 c 3 c 1 hour note 1 55 c 3 c 1 hour <2> 50 cycles, 4 hours/cycle <3> display data is black. thermal shock (non-operation) <1> C20 c 3 c 30 minutes note 1 60 c 3 c 30 minutes <2> 100 cycles <3> temperature transition time within 5 minutes vibration (non-operation) <1> 5 - 100 hz, 19.6 m/s 2 (2g) note 1 1 minute/cycle, note 2 x, y, z direction <2> 120 times each direction mechanical shock (non- <1> 539 m/s 2 (55g), 11 ms note 1 operation) x, y, z direction note 2 <2> 5 times each direction esd (operation) 150 pf, 150 w , 10 kv note 1 9 places on a panel note 3 10 times each place at one-second intervals dust (operation) 15 kinds of dust (jis z 8901) note 1 hourly 15 seconds stir, 8 times repeat notes 1. display function is checked by the same condition as lcd module out-going inspection. 2. physical damage. 3. discharge points are shown as follows.
NL8060AC26-17 20 data sheet en0493ej1v0ds00 general cautions next figures and sentence are very important, please understand these contents as follows. this figure is a mark that you will get hurt and/or the module will have damages when you make a mistake to operate. this figure is a mark that you will get an electric shock when you make a mistake to operate. this figure is a mark that you will get hurt when you make a mistake to operate caution do not touch an inverter on which is stuck a caution label while the lcd module is under the operation, because of dangerous high voltage. (1) caution when taking out the module <1> pick the pouch only, when taking out the module from a carrier box. (2) cautions for handling the module <1> as the electrostatic discharges may break the lcd module, handle the lcd module with care against electrostatic discharges. <2> as the lcd panel and backlight element are made from fragile glass material, impulse and pressure to the lcd module should be avoided. <3> as the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. <4> do not pull the interface connectors in or out while the lcd module is operating. <5> put the module display side down on a flat horizontal plane. <6> handle connectors and cables with care. <7> when the module is operating, do not lose clk, hsync, or vsync signal. if any one of these signals is lost, the lcd panel would be damaged. <8> the torque for mounting screw should never exceed 0.294 nm (3 kgfcm). <9> dont push or rub the surface of lcd module please. if you do, the scratches or the marks like rubbing marks may be left on the surface of the module. (3) cautions for the atmosphere <1> dew drop atmosphere must be avoided. <2> do not store and/or operate the lcd module in high temperature and/or high humidity atmosphere. storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. <3> this module uses cold cathod fluorescent lamps. therefore, the life time of lamp becomes short conspicuously at low temperature. <4> do not operate the lcd module in high magnetic field. caution
NL8060AC26-17 21 data sheet en0493ej1v0ds00 (4) caution for the module characteristics <1> do not apply any fixed patterns data signal to the lcd module at product aging. applying fixed pattern for a long time may cause image sticking. <2> this module has the retardation film which may cause the variation of the color hue in the different viewing angles. the ununiformity may appear on the screen under the high temperature operation. <3> the light vertical stripe may be observed depending on the display pattern. this is not defects or malfunctions. <4> the noise from the inverter circuit may be observed in the luminance control mode. this is not defects or malfunctions. (5) other cautions <1> do not disassemble and/or reassemble lcd module. <2> do not readjust variable resistors nor switches etc. <3> when returning the module for repair etc., please pack the module properly to avoid any damages. we recommend the original shipping packages. <4> in case that the scan comverter is used to convert vga signal to ntsc, it is recommended using the frame- memory type, not the line-memory. liquid crystal display has the following specific characteristics. there are not defects nor malfunc- tions. the display condition of the lcd module may be affected by the ambient temperature. the lcd module uses cold cathode tube for backlighting. optical characteristics, like luminance or uniformity, will be changed by the progress in time. uneven brightness and/or small spots may be observed depending on different display patterns.
NL8060AC26-17 22 data sheet en0493ej1v0ds00 outline drawing front side (unit in mm) * the torque to mounting screw should never exceed 0.294 nm (3kgfcm). * the valuse in parentheses are reference. 11.5 max 5.25 0.3 2.75 0.2 (6.3) (88.3) (3.7) 8.25 typ 5.25 0.3 2.75 0.2 cn1 df9c-41p-1 v 185.1 0.5 (29.4) 166.6 0.3 (5.7) (5.1) 17 0.3 (5.7) (5.1) 243 0.5 235 0.3 (215.4) (bezel opening) (4.8) 7.2 0.3 (211.2) (active area) (9.3) (2.8) (4) (2.9) (3.9) 11.5 max 8.25 typ (8.1) (4.7) 132.6 0.3 (8.1) (4.7) (158.4) (active area) 146.6 0.3 (12.9) (161.8) (bezel opening) (2.9) (3.9) 8.25 typ 11.5 max (88.3) 5.25 0.3 2.75 0.2 (2.8) (4) 5.25 0.3 2.75 0.2 4-cpims m2 l4 2- 3.5 f (1.8) (3.15) (active area) (module center) 2-r1.75
NL8060AC26-17 23 data sheet en0493ej1v0ds00 outline drawing rear side (unit in mm) 2000a483324 k made in japan es2228423 k2000a483324 NL8060AC26-17 bhr-03vs-1 (jst) (4.5) (5) (5) (3.4) (6.8) (8) (5) (5) (6.8) (5) (5) (3.4) (3.4) (4.5) (2.4) (6.6) (2.4) (5.6) 2.3 0.5 4.0 0.5 (5) (5.3) (16) (22) 88.9 0.5 (5.3) (5) 1pin: cold, 2?pin: hot 60 10 df9c-41p-1 v nion voltege caution risk of electric shock. disconnect the electric power before service. name 104dlm- s * * * - * pal no. the tft color lcd panel contains cold cathode flourescent lamps. please follow local ordinances or regulations for its disposal
NL8060AC26-17 no part of this document may be copied in any form or by any means without the prior written consent of nec corporation. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or of others. while nec corporation has been making continuous effort to enhance the reliability of its electronic components, the possibility of defects cannot be eliminated entirely. to minimize risks of damage or injury to persons or property arising from a defect in an nec electronic components, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. nec devices are classified into the following three quanlity grades: "standard", "special", and "specific". the specific quanlity grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. the recommended applications of a device depend on its quality grade, as indicated below. customers must check the quality grade of each device before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support system or medical equipment for life support, etc. the quality grade of nec devices is "standard" unless otherwise specified in nec's data sheets or data books. if customers intend to use nec devices for applications other than those speci fied for standard quality grade, they should contact an nec sales representative in advance. anti-radioactive design is not implemented in this product.

▲Up To Search▲

Price & Availability of NL8060AC26-17

	To Download NL8060AC26-17 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .